+55 15 99645-9416

Technical Support

Vegetable Centrifuges

CTD 200 | Direct Transmission Centrifuges

Product characteristics

With an innovative spirit, CTD.200 is considered the most advanced vegetable centrifuge ever developed in Brazil, and especially, with the best cost-benefit ratio. Its proactive system enables stable operation and very low maintenance. Built of sanitary materials, CTD.200 is called Direct Transmission Centrifuge, because the motor shaft is directly coupled to the centrifuging basket. As the motor is installed under the equipment, and not on the side, there is no need to use belts, bushings and bearings.

Thus, such characteristics exclude the need for grease, constant maintenance, and minimize, at the same time, the imbalances caused due to belt transmission. The CTD 200 was designed to remove excess water in vegetables, vegetables and fruits from cleaning, thus ensuring products with the minimum amount of moisture so that they can be packaged.

How does CTD 200 work?

The product, when centrifuged in CTD.200, is accommodated in a basket-shaped seamed soft screen or an optional removable perforated plastic basket, which are placed inside the equipment rotor. When driven, the rotor causes the basket or the screen to rotate at speed of up to 800 revolutions/min, removing all water from the previous process. With a convenient control panel, it is possible to preset the rotational speed of the basket with four programmed speeds and to determine the desired centrifuging time by means of a timer.

Learn about the competitive advantages of the CTD 200

  • Basket rotor coupled directly to the motor shaft; there is no need of greasing, because the system dampens the vibration, making the equipment work balanced;
  • Very quiet equipment as it does not contain drive belts, bushings and bearings;
  • Automatic electronic brake of the centrifuging basket. At the end of the cycle, the brake is turned on causing a quicker stop of the basket, which, when reaches speed 0, emits a sound signal indicating the end of the cycle, respectively. To start a new cycle, just close the lid of the equipment, no need of manual activation;
  • Quick start. Working with 08-pole motor, the centrifuging basket quickly reaches the set speed;
  • Panel with luminous indications and possibility of fixing on its own pedestal or a wall;
  • Low maintenance, no need for greasing;
  • CTD.200 is not anchored to the floor as its fixing system is simple and enables it to be easily removed at any time;
  • The equipment is provided with a plug to decouple the machine from the panel, making it easier to move the equipment without having to move the panel in case of transport or cleaning the work area;
  • The operator works in an ergonomic position, with no need to lower to insert or remove the basket into the equipment, or excessive force to remove it from the machine.


ProductivityLeaves up to 250 kg/hour*
Vegetables up to 400 kg/hour*
External DimensionsL 718 x W 830 x H 995 (mm)
Basket DimensionsD 500 x H 400 (mm) – conical shape
Rotor DimensionsD 406 x H 238 (mm) – conical shape
Total Basket Volume40 (liters)
Total Rotor Volume27 Liters
Basket Mass2 kg
Rated Basket Rotation800 rpm
Voltage220 V (single-phase)
Motorization1.0 hp; 08 poles; 800 RPM
Total Installed Power0,75 kW
Weight125 kg

* Productivity might vary depending on desired centrifuging time

** The total volume of the basket does not correspond to the volume of product that must be inserted, as the basket can never be full.

Versions and Accessories of your CTD 200

  • Additional Plastic Basket: Optional basket to speed internal logistics up. While one basket is centrifuging, the other is collecting food after the washing.
  • Inner Polyester Screen for Basket: Accessory attached inside the centrifuging basket, helping to minimize losses when centrifuging minimally cut products.
  • Malleable Screen Basket: Accessory attached inside the centrifuging basket or directly on the centrifuging rotor, a more economical option that also helps to minimize losses when centrifuging minimally cut products.
  • Electrical Panel Pedestal: Accessory for those who want to fix the electrical panel next to the machine, usually when the machine is placed far from walls.



CTD 200 – NHS

Common Centrifuge

Bushing ReplacementBRL 0.00 (not required)BRL 360.00
Axle ReplacementBRL 0.00 (not required)BRL 100.00
Shock Absorber ReplacementBRL 0.00 (not required)BRL 180.00
Grease (01 kg)BRL 0.00 (not required)BRL 96.00
Stainless Spring RetainerBRL 140.00BRL 0.00 (not required)
Technical M.O (2hr)BRL 0.00 (not required)BRL 180.00
Total in two yearsBRL 140.00BRL 916.00
*approximated values

Descarga nuestro catálogo usando el botón abajo

Download our catalog using the button below!

Baixe nosso catálogo no botão abaixo

Posso ajudar?